The HCDA Series is our top of the line CATV drop/subscriber amplifier. The HCDA amplifiers are unsurpassed in environmental ruggedness with sealed F-ports, powder-coated paint and a RFI hermetically-sealed back plate. This amplifier comes in one, two and four-output port models, with active or passive return.
The HCDA-1FRA is the same as the HCDA Series, with the addition of reverse amplification to overcome return path loss.
The HCDA-1RA provides amplification to the return path only - the forward path is passive.
Features & Benefits:
-
Ideal for Off-Air & Digital Signal Pre-Amplification.
-
1 GHz Bandwidth
-
Low Noise Figure: 3 dB
-
Adjustable Gain in Both Directions (HCDA1-FRA-AG)
-
High Return Loss (20 dB)
-
Surge Protected (IEE C62.41-1991, All Ports)
-
130 dB RFI Shielding
-
L.E.D. Power Indicator
-
Hermetically-Sealed Case & Ports
-
Direct D.C. Powering or Cable Multiplexed (Optional Inserter Needed)
-
Plug-in Power Supply Included
CLICK HERE FOR HOLLAND DROP AMPS
PPC's Evolution drop amplifiers with passive return offer superb RF performance and high reliability. Our amplifiers provide low noise amplification of forward path signals while passing through return path signals. All of the F-ports are located on the bottom of the housing in our 1-port and 2-port models to allow for installations in small spaces.
Features & Benefits:
PPC's Evolution drop amplifiers with passive return offer superb RF performance and high reliability. All ports are located on the bottom of the housing to allow for installations in small spaces and our nickel plated brass F-ports incorporate a patented enhanced conical seizure mechanism maximizes contact surface and center conductor retention.
General Specifications:
-
RFI Isolation: 100 dB
-
Surge Withstand (RF Ports): 6kV, 3kA loc. B IEEE C62.41-1991 Cat. B3 (combination wave) per ANSI/SCTE 812007
-
6kV, 200 amperes IEEE C62.41-1991 Cat. A3 (ring wave) per ANSI/SCTE 81 2007
-
F-Ports: Conform to ANSI/SCTE 01 2006; conical seizures; pressure sealed "F" ports up to 15 PSI
-
Impedance: 75 ohms
-
Operating Temperature: -40 C to +60 C
CLICK HERE FOR EVOLUTION DROP AMPS
The PCTMA2 series RF amplifiers have an ultra mini design to give you more space to relieve congested installs in which this compact but robust amp offers superior performance when space is at a premium. PCT amplifiers feature a lightweight powder coated and weather sealed housing for superior corrosion protection. PCT amplifiers have precision machined F ports (conforms to SCTE standards) that are gold plated with beryllium copper construction to provide optimal distribution and amplification of your RF signals.
Features & Benefits:
-
1 output RF amplifier
-
15dB per output
-
Ultra mini body design
-
Lowest distortions performance available
-
IEEE 6 kV, B3 surge withstand on all RF ports
-
Gold-plated, beryllium copper construction
-
Sealed F ports (conforms to SCTE standards) with patented DSM seizure technology
-
Distribution amplifier and its power supply can withstand up to 140° F temperatures
CLICK HERE FOR PCT DROP AMPS
|
Power Inserter for Remote Powering of Drop Amplifiers (EVO1-PI) $5.25
|
