|
|
HDTV Satellite Multiswitch, 5 in/8 out
The professional series dual satellite multiswithces have been specifically designed for both highend home installations and MDU’s requiring higher return loss ports. These switches are ideal for use in single satellite dish installs where future HDTV expansion will require second satellite capabilities.
* 22KHz Satellite Switching, 13/17V Polarity Switching
* Low Distortion Satellite Amplification
* High Input Capability Terrestrial Amplifiers
* High Output Return Loss for MDU and Larger Systems
* Moisture-Sealed, Heavy Duty Diecast Cases
* Diode Steered Output Ports
SPECIFICATIONS:
Input Bands
Satellite: 950-2150MHz
Terrestrial: 54-850MHz
Return Path: 15-42MHz **
Noise Figure
Satellite: 6dB
Terrestrial: 4dB **
Output Return Loss: 14dB **
Control Voltage: 13/17 VDC Between Left and Right Polarization **
Control Signals: 22KHz Between Satellites **
Cross Polar Isolation: 30dB
|
|
|
HDTV Multiswitch 5 in / 8 out (HMS 58) $109.00
|
|
The LA Series of amplifiers has been developed for use in satellite distribution systems where amplification is required in line with the cable. The high input capability and low noise make the LA Series amplifiers perfect choice for large MDU satellite systems. Wide Bandwidth (50 - 2050 MHz) * High Input Capability * Low Noise * Low In-Line Powering (40 ma) * High Gain * Bandwidth: 50 - 2050 MHz * Gain: 20 dB * Noise Figure: 5 dB * Maximum Output (32 Ch): -18 dBm * Power: 12 - 18 VDC@50mA
|
|
Non-Amplified Terrestrial Input; * Satellite Line Powered; * This model multi-switch is passive, powered only by the connected satellite receivers; * 3 Inputs: 2 Satellite, 1 Terrestrial; * Moisture Sealed; * 40-2150 MHz Operation; * DirecTV Approved
|
|
Places Both Polarizations of a Dual LNB Satellite System (DBS) onto a Single Coax
|
| |
|
|
|
|
|
In a satellite system, half of the channels (odd or even polarization) travel along the coax from the LNB to the receiver at any given time. When the channel is changed at the receiver, the voltage going from the receiver to the LNB changes, causing the LNB to change polarizations. In a Dual LNB system with a Multiswitch, one LNB is fixed on the odd polarizationy while the other LNB is fixed on the even polarization. When the channel is changed at the receiver, the change in voltage from the receiver causes the Multiswitch to switch from one LNB to the other (for that particular receiver. Each receiver is independent from one another). In a STACKED system, the even polarization is UPCONVERTED to frequencies right above the odd polarization. The result is that ALL of the channels travel along the coax simultaneously, similar to a cable TV system. No need for a Multiswitch. At each outlet, there does need to be a DESTACKER (plus receiver) or a WIDEBAND receiver. Perfect for Condos, Townhouses, Apartment Complexes, Hotels, and anywhere there are multiple receiver locations.
|
|
|
|
Commercial DBS Stacker (SAL20-24) $283.94
|
|
|
Residential DBS Stacker (uS575-T) $167.16
|
|
Single Line To Dual Down-Conversion
|
Separates Both Polarities From Single Line For Use With Non-Wideband Receivers
|
|
|
|
DBS Destacker (D575) $80.58
|
|
|
DBS Destacker (Power Passing)(D575P) $88.98
|
|
|
Dual DBS Destacker (D575d) $130.00
|
|
|
PAL1-T Automatic Gain DBS Amplifier, -1dBm Out $182.21
|
|
|
PAL5-T Automatic Gain DBS Amplifier, -5dBm Out $182.21
|
|
|
PAL10-T Automatic Gain DBS Amplifier, -10dBm Out $182.21
|
|
|
CA30RDBS SMATV & DBS Autolevel Amplifier $253.00
|
|
Diode Steered, 15-2150MHz, High Return Loss Splitters
|
| |
|
|
Wideband Operation 15MHz to 2150 MHz)* Higher Return Loss (15dB @2 GHz Typical) * Ultra-Flat Response (±0.1 dB in any 24 MHz) * Flat "F" Ports with 1 inch spacing * Solder Back Sealed (140 dB RFI Shielding)
|
|
|
High Frequency Splitter, 2-Way $7.50
|
|
|
High Frequency Splitter, 3-Way $10.50
|
|
|
High Frequency Splitter, 4-Way $11.75
|
|
|
High Frequency Splitter, 8-Way $21.00
|
|
13/18V Dual Voltage Power Supply/Inserter -- * Provides Power for Both Polarities of LNB * Highly Regulated DC * Short Circuit Protection
|
|
|
Dual Voltage Power Supply/Inserter $36.56
|
|
|
|
