Welcome
Connectors
Splitters & Taps
Amplifiers
Tools
Home Electronics
Satellite
HDTV
Miscellaneous
Cable
Headend
Test Equipment
References
Downloads
Internet Links
Residential Pre-Wiring
CAT5e for CATV Distribution
Returns & Exchanges
Shopping Cart
Contact Us
Other
e-mail me

The GHS-FC LI Series premium grade splitters feature low intermod distortion, enhanced return loss and isolation for the reverse band. Hum modulation and AC surges are reduced by capacitor decoupling on all ports. Features clear lacquer over-coating and pressure-sealed F ports for durability. ** FEATURES * Lowest Intermodulation Distortion * Enhanced Return Loss and Isolation * Flat-End, Small Aperture Ports * Double Thick Plating With Clear * Lacquer Over-Coating * Port Protection Caps * Non-Magnetizing * Capacitor Decoupling on all Ports * 6kV Survivability * Pressure-Sealed F-Ports
Specifications

 
Holland 2-Way Splitter $5.50

 
Holland 3-Way Splitter (Unbalanced) $6.25

 
Holland 3-Way Splitter (Balanced) $6.35

 
Holland 4-Way Splitter $6.75

 
Holland 8-Way Splitter $11.50

Low Intermod * 5-1000MHz Bandwidth * 140dB RFI/EMI Shielding (Solderback) * Higher Port Return Loss (Optimized for Digital Applications) * Round Seizing Pins (Patented) * Small Aperture Flat End Ports (Meets SCTE #IPS-SP-406) * Higher Downstream Isolation (Tap-to-Out) * Low Insertion Loss
Specifications

 
Holland Directional Coupler (Tap) -6dB $5.50

 
Holland Directional Coupler (Tap) -9dB $5.50

 
Holland Directional Coupler (Tap) -12dB $5.50

Separator/ Joiners are made to separate or combine (diplex), the required band with a safety guardband between. Insertion loss has been held to minimal levels making our diplexer products ideal for use in signal separation applications where low loss is critical. * Allows One-Way Amplifiers to become Two-Way * Separates Return Signals (Sub-Bands) on Head Ends * Provides Low Loss Sub-Band Signal Insertion in the distribution System or at the Head End

 
Sub-Band Diplexer (SBD) $13.50

PCT's Genesys II drop passives offer exceptional performance and long-term reliability for drop installations, particularly in systems with cable modem applications. Genesys II splitters were specifically designed for minimizing intermodulation distortions and spurious signals. Including with the Genesys II Series is PCT's patented Digital Seizure Mechanism (DSM), which provides significant advantages in center conductor retention, surface contact area, electrical performance, and surge withstand. Superior intermodulation distortion and second harmonic performance *Excellent return loss and port-to-port isolation in the return band *Patented DSM seizure technology provides increased spring retention for better surface contact *Gold-plated, beryllium copper construction for better corrosion resistance, impedance matching and prevention of common path distortion *6 kV surge withstand, guaranteed second order harmonics performance after 5 surges to each port of 6 kV (per IEEE.C62.41.1991 Category A3) *Patented spark gap improves surge withstand capabilities, directs surge to ground before entering the housing and circuit board *Tin-plated backplate provides minimum -130 dB shielding effectiveness and superior defense against long-term corrosion factors *-60 dBmV spurious signals and 2nd harmonics with a +55dBmV input carrier *Weather-sealed "F" ports *Meets all SCTE specifications *Machine threaded, flat "F" ports
Specifications

 
PCT 2-Way Splitter $5.50

 
PCT 3-Way Splitter (Unbalanced) $6.25

 
PCT 3-Way Splitter (Balanced) $6.35

 
PCT 4-Way Splitter $6.75

 
PCT 8-Way Splitter $11.50

PCT's Genesys II drop passives offer exceptional performance and long-term reliability for drop installations, particularly in systems with cable modem applications. Genesys II splitters were specifically designed for minimizing intermodulation distortions and spurious signals. Including with the Genesys II Series is PCT's patented Digital Seizure Mechanism (DSM), which provides significant advantages in center conductor retention, surface contact area, electrical performance, and surge withstand. Superior intermodulation distortion and second harmonic performance *Excellent return loss and port-to-port isolation in the return band *Patented DSM seizure technology provides increased spring retention for better surface contact *Gold-plated, beryllium copper construction for better corrosion resistance, impedance matching and prevention of common path distortion *6 kV surge withstand, guaranteed second order harmonics performance after 5 surges to each port of 6 kV (per IEEE.C62.41.1991 Category A3) *Patented spark gap improves surge withstand capabilities, directs surge to ground before entering the housing and circuit board *Tin-plated backplate provides minimum -130 dB shielding effectiveness and superior defense against long-term corrosion factors *-60 dBmV spurious signals and 2nd harmonics with a +55dBmV input carrier *Weather-sealed "F" ports *Meets all SCTE specifications *Machine threaded, flat "F" ports
Specifications

 
PCT Directional Coupler (Tap) -6dB $5.50

 
PCT Directional Coupler (Tap) -9dB $5.50

 
PCT Directional Coupler (Tap) -12dB $5.50

 

 




|Welcome| |Connectors| |Splitters & Taps| |Amplifiers| |Tools| |Home Electronics | |Satellite| |HDTV| |Miscellaneous| |Cable| |Headend| |Test Equipment| |References| |Downloads| |Internet Links| |Residential Pre-Wiring| |CAT5e for CATV Distribution| |Returns & Exchanges| |Shopping Cart| |Contact Us| |Other|